Double Servo Flexo Printing Machine

Product Details

Features

1. The whole machine is controlled by Baumüller Servo Operating System.

2. Each Printing Station is driven by Double Servo. Imagine you have a 8-color HSR-340 inline flexographic press with 2 die cutting stations & sheeting function. There will be 23 servo motors in total on this machine, which ensures the high precision of printing & auto-chromatography while the machine runs in a high speed.

3. Suitable for printing variety film material,such as PET,BOPP,PVC,PP and so on

Specification

1. Unwinder 1set

♦ Maximum diameter of unwinding 1050mm, pneumatic feeding method

♦ 3 inch shaft

♦ Servo tension control system

♦ Paper breakage platform for Pneumatic clamping

♦ BST automatic web guiding device

♦ Pneumatic components adopted by Airtac company from Taiwan

♦ Corona treatment device can effectively increase the amount of ink on the film

♦ Dust removal from the surface of raw material with dust removal device

2. Second level tension part 1 set

♦ 1 sets of traction units, servo drive

♦ French Merobel tension

♦ Pneumatic clutch of high precision clip roller

3. 4 sets of printing unit

♦ Servo drive impression cylinder

♦ Servo drive plate cypinder

♦ Surface hard aluminum guide roller

♦ Reserved hot air station , UV station , LED UV station for option

♦ Automatic clutch pressure function of plate roller

♦ Lateral position adjustment device

♦ High precision impression bottom roller

♦ Quick replacement scraper

♦ Automatic registration function

4. LED UV drying system and ARC drying system

♦ LED UV 30% Using the performance of frequency conversion power supply, the same output power can save 30% more energy than ordinary lighting device.

♦ The power has two options, manual and automatic, which can control power step by step when manual, and follow automatically with the speed of printing machine, and can fine adjust the power of each color group separately.

♦ Small size, convenient installation

5. Rotary die cutting station (option)

♦ die cutting station with the machine

♦ Lateral position adjustment device

♦ The wallboard made by the quenched and tempered steel ensures the rigidity of the unit

♦ High hardness alloy bottom roll

♦ Die cutting pressure regulating device

♦ Servo fine tuning is more convenient

♦ The upper part of the die cutting seat is equipped with the crane to replace the risk of manual handling. The upper part of the die cutting seat is equipped with the crane and the risk of replacing the manual handling is replaced by the top part of the die cutting seat.

6. Waste coil unit

♦ Full Servo driven Self-operation, automatically increasing Power with Winding diameter

♦ 3 inch shaft, with rotary gas supply joint

♦ Maximum waste diameter 900mm

♦ AIR shaft used for the rewinding

7. Rewinder device

♦ Maximum diameter 1050mm

♦ Pneumatic feeding mode

♦ 3inch shaft

♦ The output torque of frequency conversion motor can be adjusted according to the winding diameter at that time to ensure the stability of winding tension.

8. Conveyor optional

♦ Can be added at the last sheeting station for IML label cutting

Configuration

http://www.hongsheng-machine.com/